Description:
This is Xray 1/12 X12 2025 2WD Pan Car Kit EP. The new one-piece chassis design provides more consistent handling in all track conditions. The chassis concept integrates with the front Tweak-Free Suspension and the rear Tweak-Free POD System to maximize performance. The chassis plate’s edges are beveled for less drag on the track surface during cornering to improve handling and efficiency. Special cut-outs for optimal flex characteristics. The standard chassis is CNC machined from 2.0mm Swiss 7075 T6 aluminum.
The 2-piece rear pod concept is positioned above the one-piece chassis plate. As part of the new pod assembly, the pod plate controls the droop setting along with a pod angle adjustment and supports the side springs. The new rear spring location improves forward traction and lowers CG while offering better adjustability. The new configuration controls the pod droop adjustment using the rear bump spring. The new composite spring adjustment nut is compatible with both linear and conical springs for maximum versatility and adjustment choices. The pod angle adjustment is a new setting for fine tuning handling; controlled by a set screw at the rear of chassis. The POD assembly includes aluminum bulkheads and carbon fiber upper and lower pod plates. The pod mounting system improves traction and stability, while also reducing tweak issues after crashes. The rear carbon fiber upper pod plate uses new super lightweight composite bushings instead of locknuts to save weight, lower CG and improve the clean look of the car. The upper plate mounts to the bulkheads with 4 centering pins and 2 screws to keep the assembly in proper alignment and minimizing the chances of tweak after an impact on the track.
New lightweight aluminum bulkheads help lower CG as part of the new POD assembly, with the left side bulkhead adding a cooling fan mounting provision. The bulkheads’ design minimizes weight and lowers CG to improve stability. Centering pins help align the carbon fiber plates with the alum bulkheads to reduce tweak issues in serious crashes for maximum reliability. The bulkheads use compact eccentric bushings with fine adjustment increments for perfect ride height control while maintaining a low center of gravity. The compact ride height eccentrics allow for compact bulkhead dimensions to reduce weight and a lower CG.
The carbon fiber rear brace is thin and light, continuing with the efforts to maintain the lowest possible CG while controlling pod flex. The rear brace mounts to the bulkheads from the top with a single mounting point to improve tweak resistance.
Feature:
- All-new one-piece chassis design with more consistent handling in all conditions and improved tweak resistance
- Narrower chassis shape reduce chassis drag during cornering
- Rear POD concept on top of chassis for less drag and improved tweak resistance
- Adjustable POD angle controlled by set screw at the rear of chassis for fine tuning
- Rear spring location improves forward traction with increased adjustability and lower CG
- Rear droop adjustment through rear POD spring tension that sits in a special composite adjuster
- Universal rear spring nut holder works for both conical and linear springs
- 2-piece lower pod plate mounts to the bulkheads, offering droop and pod angle adjustments with support for the side springs
- Ultra-light, lower CG bulkheads are foundation of new POD system
- Left side bulkhead has mounting holes incorporated to mount optional motor cooling fan
- Forward center pivot position for maximum adjustability
- Lowered pivot holder and small diameter pivot ball offer lower roll center positions and greater adjustment range
- Carbon Fiber top plate for center shock and side damper mountings
- New rear carbon side spring brace aligns with new POD geometry
- Composite Snap On™ bushings press into carbon fiber parts for secure and reliable hardware installation
- All-new spring-free center shock absorber with 1-hole piston provides exceptional bump handling, low maintenance, and helps lower CG.
- New front lower suspension arm is 1mm narrower per side for more initial steering and increased track width adjustability
- Aluminum lower arm pivot balls included in the kit reduce weight by 63%
- Hollow front kingpins improve lubrication of the front suspension
- Aluminum steering blocks with special factory pre-pressed Teflon insert for minimal friction and smoother movement
- New Ackermann positions improve steering characteristics with optional eccentric axle with 1mm less trail for greater adjustability
- 1.6mm side braces with a narrower design save weight and leave more space for electronics
- Narrower side brace mounting holders use M2.5 screws for weight savings
- Aluminum side link holders with 2-pin design for more rigidity and improved tweak resistance
- 2-pin carbon fiber side link plates integrate with aluminum holders for reliable alignment and offer 3 side link front pivot mounting positions for maximum adjustability
- Extra forward battery position and backstop provides more consistent handling with improved cornering speed
- Narrower rear wheel hubs for additional track width adjustability and improved clamping of rear axle
- Shorter solid axle shaft to work with new narrower rear wheel hubs
- Carbon Fiber front bumper aligns with new chassis shape
Include:
- Xray 1/12 X12 2025 2WD Pan Car Kit EP (1 Set)
Required:
- Transmitter & Receiver
- Electronic Speed Controller
- Steering Servo
- Electronic Motor
- LiPo Battery
- Battery Charger
- Wheels and Tires
- 1/12 Body
- Paint
